So, Here is my Step-By-Step information to configuring a Wi-Fi network with BSNL DataOne. Though many cellular routers claim that it is really a no-brainer setup to configure the cellular multilevel, I found it being not as simple as it looks being. As an example, NetGear comes with a wizard that in no way works with BSNL broadband connected via HUAWEI SmartAX 880. For those of you desperate to take your BSNL DataOne broadband mobile, follow these measures. It took me a lot more than 2 days to figure and come out with these configuration details.
Just before I begin, let me share what I’ve:
1)BSNL DataOne 256Kbps connection.
2)HUAWEI SmartAX MT880 (The modem supplied by BSNL).<br>
3) (configuring netgear dg632 for BSNL)NetGear WGR614v5
You will find two actions to configuring your cellular system. First, you need to alter the default settings of the SmartAX MT880 modem and configure it to allow PPPoE (PPP over Ethernet). Second, you need to configure the NetGear Router to talk to the modem.
Keep your modem, wireless router and your username and password from BSNL handy just before you proceed to the subsequent action.
If you need to alter your existing configuration, take a backup of one’s configuration. This manual is to build your network in the ground-up.
one)Configuring and testing your Broadband connection
·Setup the modem as per the instructions mentioned in the manual. Make sure that the RJ11 (thin) cable from the splitter is connected to the ADSL port and the RJ45 cable connects your machine towards the Ethernet port with the modem.
·Change the IP properties of your Ethernet card to the following:
192.168.1.two
255.255.255.0
192.168.one.one
·Open the browser and type http://192.168.1.1 to go to the HUAWEI configuration tool.
·Enter ?admin? as username and ?admin? as password
·Expand the House node and select the WAN Setting
·Under this web page, configure the following:
PVC Number ?!? PVC 0
Wan Type ? PPP
Connection Type ?? PPPoE
VPI/VCI ?!? 0 / 35
Default Route – Enabled
User Name ? <Your ISP UserName>
Password ? <Your ISP Password>
Use DNS ?!? Enabled
Max Idle Time ?!? Usually On
·Click on Apply and enable the modem to restart.
·Close the browser window
·Open the browser and sort http://192.168.1.1
·Enter ?admin? as username and ?admin? as password
·You must see the Summary page. The Status is typically Red indicating that the connection isn’t ON.
·Click about the Plug icon inside the Note column to connect.
·After the Connecting message, you must see the summary page again using the Status turning Green. Notice the IP Tackle and also the Gateway Tackle.
·Expand Tools node and click on Misc.
·Type www.msn.com and click on Ping
·You must see Ping Result: Successful
·Click about the Lan Options website link under the Advanced node.
·Configure the next:
IP Tackle ? 192.168.1.90
Subnet Mask ?!? 255.255.255.0(/24)
Local Domain Title ?!? Blank
·Click on Apply and permit the modem to restart
·Open the Network qualities of the Ethernet card and transform the IP qualities to the next
IP Deal with ? 192.168.1.a couple of
Subnet Mask ?? 255.255.255.0
Default Gateway ?!? 192.168.1.90
Preferred DNS server ?!? 61.one.96.69 (BSNL DNS Server IP)
Alternate DNS server ? 61.1.96.71 (BSNL DNS Server IP)
·Open your browser and type your favorite URL. You ought to be on the internet by this time!
two)Configuring the Cellular Router and enabling the WPA protection
·Connect the network cable in the NetGear cellular router towards the machine.
·Open the IP Qualities of one’s Network card and Permit DHCP. Choose the following about the IP properites dialog.
Obtain IP Address Automatically
Obtain DNS Server Address Automatically
·Open the browser and sort http://192.168.one.1/basicsetting.htm
·Enter ?admin? as username and ?password? as the password
·Click on Mobile Options link about the navigation pane and configure with the following values
Mobile Network
Title (SSID) – <YourSSID>
Region ?? Asia
Channel ?? 11
Mode ? g and b
Security Choices
WEP (Wired Equivalent Privacy)
Protection Encryption (WEP)
Authentication Sort ? Automatic
Encryption Strength ?? 64bit
Security Encryption (WEP) Important
Passphrase – <YourPassphrase>
·Click on Generate
·Record the value of Key1 ?? This is necessary when you log on to your Wi-Fi multilevel the very first time.
·Click on Utilize and wait till the router reboots
(Mobile will not be enabled till you complete the following stage)
·Click around the Fundamental Configurations link on the left side navigation pane and configure the following
Does your Internet connection require a login? ?!? No
Account Name ? blank
Domain Title ?!? blank
Web IP Tackle
Use Static IP Tackle
IP Address ?!? 192.168.1.91
IP Subnet Mask ?!? 255.255.255.0
Gateway IP Address ?? 192.168.one.90
Domain Name Server (DNS) Tackle
Use These DNS Servers
Primary DNS ? 61.one.96.69
Secondary DNS ?!? 61.1.96.71
Router MAC Deal with
Use Default Deal with
·Click on Utilize and wait till the router restarts
·Connect the Multilevel Cable coming in the ADSL Modem towards the Mobile Router
Few points to keep in mind ??
·Don?t connect the ADSL Lan Cable to the Web Uplink port with the Wireless Router. It in no way worked for me. Often connect it to one from the 4 ports excluding the designated World wide web port.
·IP Addresses may be anything of your choice. But it can be an excellent idea to follow the 192.168.x.x convention
·If you get lost any time, really feel free to reset the configuration by poking a pin into the reset slot about the modem as well as the router.
·Don?t compromise about the safety. Always enable WPA and save your important. Don?t let your friendly neighbors ride on your network!
Have a happy Wi-Fi surfing and drop a comment in case you need more inputs.
You can find more information about conference call dial in, internet teleconferencing, and at&t text message